Confirming and Deleting a Report Job
Press [Status Monitor].
Press [((-)] or [)(+)] to select <REPORT STATUS> ➞ press [Set].
NOTE
If there is no job, <NO REPORT JOBS EXIST> is displayed.
If there is only one report job, go to step 4.
Press [((-)] or [)(+)] to confirm the report.
If you want to delete the report job, press [Set].
If you decide to delete the job, press [((-)] for <YES>.
NOTE
To cancel deleting the job, press [)(+)] for <NO>. Once the job is deleted, the job cannot
be restored.
Press [Stop/Reset] to return to the standby display.
Checking the Status of the Jobs Stored in the Machine
7
7-5