Cleaning The Fusing Roller - Canon Color imageCLASS MF8170c Basic Manual

IMPORTANT
Paste, ink, correction fluid, and other foreign matter can soil the platen glass when you
send a document through the ADF while the paste, ink, or correction fluid on the
document is still wet. This is what causes black lines on copies. Whenever you load a
document in the ADF, always check to make sure that any paste, ink, or correction fluid
that is on the document is completely dry.
When cleaning the read area of the platen glass, take care not to damage the white roller
located on the center of the ADF.

Cleaning the Fusing Roller

If smudge marks appear on the back or front side of printed pages, clean the fusing
roller in the following procedure. Print quality deterioration can be prevented by
cleaning the fusing roller. First, print out a cleaning page using LTR or A4 size
paper. Then, feed the cleaning page from the multi-purpose tray to clean the fusing
roller.
IMPORTANT
A cleaning page cannot be printed on paper in size other than LTR or A4. Be sure to set
LTR or A4 paper in the cassette.
Press [Menu].
Press [((-)] or [)(+)] to select <MAINTENANCE> ➞ press [Set].
Press [((-)] or [)(+)] to select <ROLLER CLEANING> ➞ press
[Set].
Press [((-)] or [)(+)] to select <CLEAN PAPER PRINT> ➞ press
[Set].
A cleaning page will be printed.
Periodic Cleaning 8-3
8