Canon Color imageCLASS MF8170c Basic Manual page 163

Name
2. ALARM VOLUME
3. TX DONE TONE
ERROR ONLY
OFF
ON
4. RX DONE TONE
ERROR ONLY
OFF
ON
5. PRINT DONE TONE
ERROR ONLY
OFF
ON
6. SCAN DONE TONE
ERROR ONLY
OFF
ON
7. CALLING VOLUME
8. LINE MONITOR VOL.
3. B & W TONER SAVER
OFF
Descriptions
Adjusts the alarm volume.
0 to 3 (1)
Sets the transmission end tone settings.
The transmission end tone sounds only when any
error occurs while printing.
1 to 3 (1)
The transmission end tone does not sound.
The transmission end tone sounds.
1 to 3 (1)
Sets the reception end tone settings.
The reception end tone sounds only when any
error occurs while printing.
1 to 3 (1)
The reception end tone does not sound.
The reception end tone sounds.
1 to 3 (1)
Sets the printing end tone settings.
The printing end tone sounds only when any error
occurs while printing.
1 to 3 (1)
The printing end tone does not sound.
The printing end tone sounds.
1 to 3 (1)
Sets the scanning end tone settings.
A scanning end tone sounds only when any error
occurs while scanning.
1 to 3 (1)
The scanning end tone does not sound.
A scanning end tone sounds.
1 to 3 (1)
Adjusts the line monitor volume.
1 to 3 (1)
Adjusts the line monitor volume.
0 to 3 (1)
Sets the toner saver mode for B&W printing.
Not available for color printing.
The toner saver mode is turned off.
Menu Descriptions 10-3
10