Repacking And Transporting Your Machine - Canon Color imageCLASS MF8170c Basic Manual

Repacking and Transporting Your Machine

Be sure to unplug the power cord before transporting the machine. If the machine is
likely to be subjected to vibration (e.g., when transporting over long distances), the
following precautions should be taken. If you do not follow these precautions, the
machine may be damaged or the quality of your printouts may be adversely
affected.
Disconnect the printer cable and /or network.
Lift the scanning platform.
Open the cartridge cover.
Remove a toner cartridge from the machine. In order to avoid
direct sunlight, place the toner cartridge in the protective bag that
it came in when you purchased it.
8
Close the cartridge cover.
The machine will rotate to the next cartridge position. Repeat
steps 3 to 5 until all the toner cartridges are removed.
Open the cartridge cover again.
Remove the drum cartridge and store it as described on page 9-4.
Close the cartridge cover and lower the scanning platform.
Detach the document feeder tray.
Unplug the power cord.
8-32 Repacking and Transporting Your Machine