Press [Stop/Reset] to return to the standby display.
Confirming and Deleting a Print Job
Press [Status Monitor].
Press [((-)] or [)(+)] to select <PRINT STATUS> ➞ press [Set].
NOTE
If there is no job, <NO PRINT JOBS EXIST> is displayed.
If there is only one print job, go to step 4.
Press [((-)] or [)(+)] to confirm the file name.
If you want to delete the print job, press [Set].
If you decide to delete the job, press [((-)] for <YES>.
7
NOTE
To cancel deleting the job, press [)(+)] for <NO>. Once the job is deleted, the job cannot
be restored.
The LCD can display characters in ASCII cord. Using characters other than those in
ASCII cord may have the LCD display garbled characters.
Press [Stop/Reset] to return to the standby display.
7-4
Checking the Status of the Jobs Stored in the Machine