Copying Problems - Canon i-SENSYS MF3010 User Manual

Copying Problems

See the following sections.
The copy output is hardly readable and copied poorly.
The copy output is askew.
The copy output is hardly readable and copied poorly.
The copy output is too light or has uneven density.
Vertical white streaks appear on the copy output.
The copy output has spots and is dirty.
The copy output is askew.
Toner does not fix onto paper well.
See the following section.
"The Copy Output is Hardly Readable and Copied Poorly"
The copy output is askew.
Make sure that the number of sheets or the paper type loaded in the paper cassette meets the paper specifications.
"Supported Paper Types"
Adjust the paper guides to the paper width without space. If the problem persists, load paper with the other side face up,
or in an opposite orientation.
"Loading Paper"
Make sure that the output tray is not full.
030E-042