Connections; Connection To The Host Computer; Connection To The User System - Fujitsu MB95200H Series Operation Manual

5 Connections

5.1. Connection to the host computer

Connect the adapter to the host computer using the USB cable. Figure 5.1.1 shows how to connect
the USB cable.
Connection to the USB
connector of the adaptor

5.2. Connection to the user system

Connect the adapter to the user system.
Plug the user interface connector of the adapter into the adapter interface connector on the user
system.
When connecting the user interface connector, align the index marks (pin 1) on each of the
connectors.
For the specifications of the adapter interface connector, see "
Section 6 "Specifications".
Figure 5.2.1 shows how to connect the adapter to the user system.
Adaptor
BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 5 Connections
Figure 5.1.1 Connecting the USB cable
Adaptor interface connector to the user system
User interface connector
Figure 5.2.1 Connecting to the user system
MCU-UM-500001-E-11 – Page
Adaptor
Adapter interface specifications" in
■
Index mark (pin 1)
5
User system