Sending Faxes With Multiple Settings; Basic Sending Operations; Contrast - Brother MFC-3100C Owner's Manual

Sending Faxes with Multiple Settings

When you send a fax you can choose any
combination of these settings: set the
contrast or resolution; send using
overseas mode, delayed fax, polling
transmission or real time transmission.
After each menu selection is accepted, the LCD will ask if you want to enter
other settings:
I
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND
—OR—
Press 2 if you are finished choosing settings, and then go to the next step.

Basic Sending Operations

Contrast

If your document is very light or very dark, you might want to set the contrast.
Use S.LIGHT
document.
1
Place the original face down in the ADF.
2
Press Menu/Set, 2, 2, 1.
3
Press to select AUTO,
or
S.DARK, and then press Menu/Set.
4
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND
then go to Step 5.
5
Enter a fax number.
6
Press Black Fax Start to send a fax.
7 - 2
S E T U P S E N D
menu
to send a very light document. Use
S.LIGHT
menu—OR—Press 2 if you are finished choosing settings, and
S.DARK
or
to send a very dark