Master" Module Channel Selection; Detection Mode Selection - Interlogix SB Series Installation Manual

"Master" module channel selection

Select the channel of the barrier on "Master" module (see also "Channel
selection" on page 10).
Figure 18: Master module channel selection
Channel 1 (OFF
OFF)

Detection mode selection

Select the detection mode: simple detection or interdetection (not available on
the modules SB4200-N).
The detection mode is set on the "Master" module:
• Switch 5 of the "Master" module ON to select dual-detection.
• Switch 5 of the "Master" module OFF to select simple detection.
SB Series AIR Beam Detectors Installation Manual
Channel 2 Channel 3
(ON OFF) (OFF ON)
Channel 4
(ON ON)
19