Installing Modules In Columns; Connections - Interlogix SB Series Installation Manual

Installing modules in columns

It is possible to combine up to 4 modules in one column. Table 7 below shows
the compatibility of detector models in one column.
Table 7: Detector models compatibility
SB250-N
SB250-N Yes
SB450-N Yes
SB2100-N No
SB4100-N No
SB4200-N No
We do not recommend mixing detectors of different generations (for example,
SB250 and SB250-N) or brands in a same column.

Connections

Mount the modules as described in "Installation" on page 4.
Connect the modules between themselves via the inter-module connections A
and B (connect the A's to the A's and the B's to the B's).
Recommendation: wire the alarm relays on the module 2 (the second module
from the bottom of the column) because this module is recommended to be
selected as "Master".
SB Series AIR Beam Detectors Installation Manual
SB450-N SB2100-N
Yes No
Yes No
No Yes
No Yes
No No
SB4100-N SB4200-N
No No
No No
Yes No
Yes No
No Yes
15