Master" Module Channel Selection; Detection Mode Selection - Interlogix SB Series Installation Manual

"Master" module channel selection

Select the channel of the barrier on "Master" module (see also "Channel
selection" on page 13).
Figure 18: Master module channel selection
Channel 1
(OFF OFF)

Detection mode selection

Select the detection mode: simple detection or interdetection (not available in
modules SB4200-N).
The detection mode is set on the "Master" module:
• Switch 5 of the "Master" module ON to select dual-detection.
• Switch 5 of the "Master" module OFF to select simple detection.
22
Channel 2 Channel 3
(ON OFF) (OFF ON)
SB Series AIR Beam Detectors Installation Manual
Channel 4
(ON ON)