Omron CJ Series Operation Manual page 8

Introduction
SmartSlice GRT1-Series Slice I/O Units Operation Manual (Cat. No.
W455)
Section
Section 1
Available Units and Features
Section 2
Shared Specifications and Func-
tions
Section 3
Installation and Wiring
Section 4
Digital I/O Units
Section 5
Analog I/O Units
Section 6
Temperature Input Units
Section 7
Counter Units and Positioning Unit
Section 8
Other Units
Section 9
Troubleshooting
Appendices
6
This section describes the features of GRT1-series Slice I/O Units and lists the avail-
able Units.
This section describes the specifications and functions that are shared by all of the
Slice I/O Units.
This section provides information on installing and wiring the Slice I/O Units.
This section provides the specifications and shows the components, terminal
arrangements, wiring diagrams and dimensions for the Digital I/O Units.
This section provides the information required to operate Analog Input Units and
Analog Output Units.
This section provides the information required to operate Temperature Input Units.
This section provides the information required to operate Counter Units and the Posi-
tioning Unit.
This section provides the basic specifications for the other Units used in Slice I/O ter-
minals.
This section describes error processing and troubleshooting procedures needed to
keep the Slice I/O Units operating properly.
The appendices describe the following:
Explicit Messages
Standard Models
Power Consumption and Weight Tables
I/O Current Consumption Table
Precautions When Connecting Two-wire DC Sensors
CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)
Description