Omron CJ Series Operation Manual page 109

Slave Status Tab
The Slave Status tab displays a comprehensive overview of the status of the allocated slaves. An
example of the Slave Status tab is shown below.
 Indicator colors
The indicators in the Slave Status Flags box, indicate per slave its status, using colors. Five colors
are associated with status conditions. The indicator colors are listed below.
Indicator color
Grey
Red
Orange
Yellow
Green
 Clear Diagnostics Button
Pressing the Clear Diagnostics button will clear all new diagnostics data flags in the Unit. If all
slaves are in data exchange, pressing the button will result in all indicators turning green.
CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)
Slave Status
Associated device does not exchange Diagnostics with this Master Unit, i.e.
• Slave not allocated to this Master Unit, or
• Device is this Master Unit, or
• Device is another master device.
The slave device is not communicating with the Master Unit. It may be dis-
connected, or the Master is in OFFLINE or STOP mode.
The slave device is communicating with the PROFIBUS Master Unit, but it is
not in Data Exchange, due to incorrect parameter settings. See the slave
diagnostics for more information.
The slave device is in data exchange with the PROFIBUS Master Unit, but it
has reported diagnostics data. See the slave diagnostics for more informa-
tion.
The slave device is in data exchange with the PROFIBUS Master Unit. No
diagnostics reported.
3 Configuration Software
3
3-31