Omron CJ Series Operation Manual page 162

5 Operation
1
Open the Configuration User Interface for the slave device, by selecting it in the Network
view, and double-clicking the left mouse button.
2
Select the Station Address field at the top of the Configuration tab (see figure below) and
change the value to 10.
3
Select the OK or Apply button at the bottom of the window. The OK button will close the DTM
Configuration User Interface.
Note If, when pressing the Apply or OK button, no I/O modules have been selected as yet, a
warning message will be displayed. The I/O modules can be selected later. Pressing the OK
button with the warning, will apply the changed device address.
After changing the address in the slave DTM Configuration User Interface, the updated address will
be shown in the Network view, next to the device name.
 Changing the DTM address via the Master DTM
The slave DTM address can also be changed via the Master DTM. To accomplish this, first open the
Slave DTM Address Assignment table.
1
Select the Master DTM in the Network view.
2
Right click the mouse, and select the Additional functions entry from the context menu.
3
Select the Slave DTM Address Assignment function.
5-10 CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)