Omron CJ Series Operation Manual page 159

2
Select a device DTM in the Device Catalogue.
3
Left click the mouse and Drag the mouse pointer to the desired location in the network, i.e.
MyNetwork in the Network view.
4
Release the mouse button and the device DTM will be added to that location.
Master DTMs can only be added to the main branch of the Network. Slave Device DTMs can only
be added to Master DTMs. Whether or not a DTM can be added to the branch is indicated by the
cursor:
 Using the Add Device Button
1
Select the top of the network to which the DTM must be added, i.e. select MyNetwork in the
Network view.
2
Open the device Catalogue: Either select the View - Device Catalogue menu option, or press
the
3
Select the device that must be added to the network.
4
Select the Add Device button at the bottom of the Device Catalogue window. The device DTM
is added to the network.
• If a DTM is selected in the Device Catalogue, which can not be added to the current location in the net-
work, the Add Device button will be disabled, which is shown as a grayed out button.
Note 1 When adding a CJ1W-PRM21 Master DTM to the network, it is automatically assigned the
PROFIBUS network address 1. This address can be changed, after opening the CJ1W-
PRM21 Master DTM.
2 After adding the Master DTM to the Network view, repeat (one of) the procedures as out-
lined above to add slave DTMs to the Master DTM. In the procedures above, the highest
level for adding slave DTMs is the Master DTM.
3 When adding slave DTMs to the CJ1W-PRM21 Master DTM, they are automatically
assigned their PROFIBUS network addresses, in ascending order, i.e. the first slave is
assigned address 2, the second address 3, etc. The addresses can be changed in the
slave DTM User Interface.
The figure below shows an example network consisting of a CJ1W-PRM21 PROFIBUS Master and
three OMRON slave devices.
CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)
indicates no addition,
button in the Tool Bar.
indicates that addition is allowed.
5 Operation
5
5-7