Table of Contents
Advertisement
12. USER INTERFACE - MENU NAVIGATION
Note
Manipulation of the hardware components may only be carried
out by trained retailers or customer service employees� Improper
handling of these parts will result in loss of warranty and guarantee
claims!
Note
The appliance must only be commissioned when fully assembled�
First steps
Your new stove is equipped with modern controls� You can control
all functions via the simple user interface� The surface of the user
interface responds to the touch of a finger�
Plug in the mains plug and operate the main switch on the rear of
the stove� All LEDs will now flash white for approx� 10 seconds� The
stove can then be put into operation�
Control
You can control the main functions of your stove using 3 buttons�
OPERATION BUTTON
Switch on/off: Press and hold for 2 seconds
Change operating mode: Press 1x
PLUS BUTTON
Increase the heating power or temperature
MINUS BUTTON
Reduce the heating power or temperature
Display
The display consists of two COMFORT LEDs and eight POWER LEDs:
COMFORT LEDS
left LED: Status display
right
connected)
POWER LEDS
Display of the set heating power and
temperature or warnings and errors
Note
The user interface dims automatically after 30 seconds without
input�
LED status indicator
The individual states (operating mode, cleaning, warnings and
errors) are represented by different colours:
GREEN
Standby
WHITE
Manual mode: Heating power (30 - 100%)
ORANGE
Comfort mode: Set temperature (14 - 28 °C)
FLASHING YELLOW
Cleaning is carried out (hourly)
YELLOW
Cleaning due after consumption of 700 kg
of pellets
FLASHING RED
Warnings
RED
Error messages
LED:
Room
sensor
(orange
if
Advertisement
Table of Contents
