Table of Contents
Advertisement
11. COMFORT OPTIONS
Interface for various options
for various options
The room sensor / radio room sensor must be connected to the serial
interface (rear side of the stove/inside of the appliance) using the
connection cable supplied�
(condition as delivered)
Room sensor, Radio room sensor
This option allows you to control your stove via the room temperature�
For more detailed information, please refer to the RIKA room sensor
/ radio room sensor instructions�
External room thermostat
Your stove has an interface on the rear wall to which you can
connect a customary room thermostat� This requires a 2-pole cable
of 0�5 – 0�75 mm2 cross-section that you have to connect instead of
the cable bridge fitted for delivery�
External connection cable bridge
If the control of your stove is to be assumed by an external room
thermostat, you must connect your external room thermostat
instead of the standard built-in cable bridge�
The connected external room thermostat can only be operated in
COMFORT mode� The currently set heating power is used in this
mode�
If your stove receives an external request to stop operating, it will
take approx� 5 min for it to turn off� For all other settings on your
external room thermostat, please refer to the respective operating
instructions supplied�
Note
If neither the cable bridge nor an external room thermostat is
connected, operation is not possible� The external request has
priority over all operating modes (MANUAL MODE / COMFORT
MODE)�
|29
28
Advertisement
Table of Contents
