Viewing Your Performance Condition; Lactate Threshold; Performing A Guided Test To Determine Your Lactate Threshold - Garmin FORERUNNER 945 LTE Owner's Manual

Viewing Your Performance Condition

This feature requires wrist-based heart rate or a compatible chest heart rate monitor.
1 Add Performance Condition to a data screen
2 Go for a run or ride.
After 6 to 20 minutes, your performance condition appears.
3 Scroll to the data screen to view your performance condition throughout the run or ride.

Lactate Threshold

Lactate threshold is the exercise intensity at which lactate (lactic acid) starts to accumulate in the
bloodstream. In running, it is the estimated level of effort or pace. When a runner exceeds the threshold, fatigue
starts to increase at an accelerating rate. For experienced runners, the threshold occurs at approximately 90%
of their maximum heart rate and between 10k and half-marathon race pace. For average runners, the lactate
threshold often occurs well below 90% of maximum heart rate. Knowing your lactate threshold can help you
determine how hard to train or when to push yourself during a race.
If you already know your lactate threshold heart rate value, you can enter it in your user profile settings
Your Heart Rate Zones, page

Performing a Guided Test to Determine Your Lactate Threshold

This feature requires a Garmin chest heart rate monitor. Before you can perform the guided test, you must put
on a heart rate monitor and pair it with your device
The device uses your user profile information from the initial setup and your VO2 max. estimate to estimate
your lactate threshold. The device will automatically detect your lactate threshold during runs at a steady, high
intensity with heart rate.
TIP: The device requires a few runs with a chest heart rate monitor to get an accurate maximum heart rate
value and VO2 max. estimate. If you are having trouble getting a lactate threshold estimate, try manually
lowering your maximum heart rate value.
1 From the watch face, select START.
2 Select an outdoor running activity.
GPS is required to complete the test.
3 Hold .
4 Select Training > Lactate Threshold Guided Test.
5 Start the timer, and follow the on-screen instructions.
After you begin your run, the device displays each step duration, the target, and current heart rate data. A
message appears when the test is complete.
6 After you complete the guided test, stop the timer and save the activity.
If this is your first lactate threshold estimate, the device prompts you to update your heart rate zones based
on your lactate threshold heart rate. For each additional lactate threshold estimate, the device prompts you
to accept or decline the estimate.
44
(Customizing the Data Screens, page
25).
(Pairing Your Wireless Sensors, page
81).
(Setting
77).
Heart Rate Features