Brady BP-IP300 Operation/Configuration Manual page 71

Basic Troubleshooting Guide
Error messages
Invalid setup
Memory overflow
Multiple Label
Tags Found,
Remove Extras
Multiple Ribbon
Tags Found,
Remove Extras
Multiple Tags
Read Remove
Extra Tags
Network Error,
No Link
No Label
Detected
No label size
64
Cause
The Setup menu is
incorrectly configured.
Handshake mode is not
on.
Multiple tags on core of
material or printer did not
clear from last tag read.
Multiple tags on core of
material or printer did not
clear from last tag read.
Label tags read
incorrectly.
Ethernet is selected in the
setup menu but no
Ethernet connection.
Missing RFID Tag
The size of the label is not
defined in the software.
Remedy
Cancel the current job. Recheck
all configuration settings.
Access the printer
mode and select
handshake
.
RTS/CTS
Reboot printer to get a fresh read
of supply, if error reoccurs select
Enter to bypass and use Standard
mode.
Reboot printer to get a fresh read
of supply, if error reoccurs select
Enter to bypass and the printer will
load primary ribbon settings for
Hassle Free mode.
Remove and reinstall the label
spool and/or the ribbon spool. If
the error does not clear, recycle
power to the printer.
• Check that the Ethernet server
is available and connected,
then recycle power to the
printer.
or
• Go to the
settings
and turn off Network Error
reporting, then recycle power to
the printer.
Select Enter to bypass error and
used in Standard mode.
Check the software programming.
menu,
setup
menu