Making The Adjustments - GBC DIGITAL FEEDER Operation & Maintenance Manual

Digital Feeder Operation and Maintenance Manual

6.3 Making the adjustments

a) Adjust the sheet blower center of the sheet
stack and approximately 1/2 in below the top.
b) Adjust the master nozzle air rate control valve
for proper air flow strenght.
REGULATOR
MASTER NOZZLE
SPARE NOZZLE
INFORMATION
The sheet blower should fan approximately
12 - 15 sheets. Varies due to paper weight.
© GBC Pro - Tech February 2000
LEFT VACUUM
RIGHT VACUUM
c) Adjust the left and right paper spring plate for
adequate pressure.
INFORMATION
For heavy paper use more spring
pressure and for lighter paper use
less spring pressure.
d) Ensure the suction cups are perpendicular to the
sheet stack.
e) Adjust the vacuum cups height according to the
weight of the sheets.
Vacuum cup
height adjust
knob
WARNING
Do not set the suction cup too low where
the cups jam into the sheet stack! You
can cause damage to the suction cups.
Getting started
Page 6 - 5