Getting Started - GBC DIGITAL FEEDER Operation & Maintenance Manual

Digital Feeder Operation and Maintenance Manual

1.5 Getting started

The following symbols are positioned at
various points in Section 6 Applications.
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the feeder. These items can
get caught in the machine and choke
you or you can be crushed.
INFORMATION
The feeder will only operate if the
Explorer 107 is running and the sheet
stack limit switch is engaged.
INFORMATION
All E-STOPS ( Feeder and Explorer 107 )
must be in the unlatched position.
© GBC Pro - Tech February 2000
WARNING
INFORMATION
A minimum sheet stack height of 3 in.
( 7.6 cm ) is required for loading.
INFORMATION
This will allow you to adjust the belts
without feeding web through the laminator.
WARNING
Inform persons around the machine that
your hands are in the laminator.
INFORMATION
The belts will only move if the upper pull
roller on the Explorer 107 is turning.
INFORMATION
All five belts should fall within the
width of the sheet.
Safety
Page 1 - 9