Adjusting The Guides - GBC DIGITAL FEEDER Operation & Maintenance Manual

Getting started
c) Set the sheet stack onto the sheet table.
Folded sheet
d) Slide the sheet stack up against the center guide.
Center guide
e) Align the crease from the fold of the top sheet
so it is centered to the stack height limit switch.
f) Press TABLE
stop when the stack height switch is engaged.
Page 6 - 2
Digital Feeder Operation and Maintenance Manual
. The table will raise and
TABLE
STOP

6.2 Adjusting the guides

a) Adjust the right guide and left guide flush against
the sheet stack.
Left guide
b) Adjust the front right and front left guide flush
against the sheet stack.
Front right
guide
© GBC Pro - Tech February 2000
Right guide
Front left
guide