Operations - GBC DIGITAL FEEDER Operation & Maintenance Manual

Safety

1.4 Operations

The following symbols are positioned at
various points in Section 5 Operations.
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the feeder. These items can
get caught in the machine and choke
you or you can be crushed.
INFORMATION
If the vacuum is ON and OFF is pressed
under RUN, vacuum will stop.
INFORMATION
If vacuum is ON and OFF is pressed under
RUN, the feeding head unit will stop at its
current position.
Page 1 - 8
WARNING
Digital Feeder Operation and Maintenance Manual
Vacuum ON will only operate if RUN is ON.
Vacuum ON can be pressed to
simultaneously engage with RUN ON
When vacuum OFF is pressed, the
feeding head unit will complete its
cycle before stopping.
Refer to Section 5.3 Job programming to
Keep hands and feet away from the sheet
table when raising or lowering.
You may be crushed!
The E-STOP on the Explorer 107 will
stop the feeder. The E-STOP on the
feeder will not stop the Explorer 107.
© GBC Pro - Tech February 2000
INFORMATION
INFORMATION
INFORMATION
store paramenters.
WARNING
INFORMATION