Emergency - GBC DIGITAL FEEDER Operation & Maintenance Manual

Operations

5.2 Emergency

The Digital Feeder has been designed with
safety as a primary consideration; however, you must
become thoroughly familiar with the controls, proper
operation, proper service procedures, and safety
features of the machine before using or servicing.
INFORMATION
The E-STOP on the Explorer 107 will
stop the feeder. The E-STOP on the
feeder will not stop the Explorer 107.
Know where the emergency stop on the feeder
is ( Figure 5.2.1 Feeder E-STOP ) and the two E-
STOPs on the Explorer 107 ( Figure 5.2.2 Explorer
107 E-STOPs ) are located before operating the
equipment.
Figure 5.2.1 Feeder E-STOP
E-STOP
Page 5 - 6
Digital Feeder Operation and Maintenance Manual
Figure 5.2.2 Explorer 107 E-STOPs
Reacting to an emergency
a) In the event of an emergency, press an
E-STOP.
The E-STOP on the Explorer 107 will
stop the feeder. The E-STOP on the
feeder will not stop the Explorer 107.
© GBC Pro - Tech February 2000
E - S T O P
!
ROLL LAMINATOR
M o d e l : E x p l o r e r 1 0 7
I n p u t v o l t a g e : 2 2 0 V ~ / 6 0 H z
I n p u t c u r r e n t : 2 7 A
P o w e r c u n s u p t i o n : 5 , 8 0 0 W E - S T O P
o
T e m p e r a t u r e r a n g e : U p t o 1 6 0 C
C u r r e n t r a t i n g o f c i r c u i t b r e a k e r : 3 0 A
M a x l a m i n a t i n g w i d t h : 1 0 7 5 m m
S e r i a l N o : # # # # # # # # # # # # #
M a d e i n K o r e a / F a b r i q u e E n C o r e e
INFORMATION