Installing The Camera To The Mounting Plate - Bosch VEZ-221-ECCE Installation Manual

40 en | Installing a Wall Mount
5.1.4

Installing the Camera to the Mounting Plate

To install the camera to the mounting plate, do the following:
1.
2.
3.
4.
5.
F.01U.164.576 | 2.0 | 2010.03
Attach the mounting plate (supplied with dome) to the
dome mounting cap with the three (3) screws supplied.
Figure 5.7 Attach Mounting Plate to Dome Cap
1 Cable Hole (40 mm maximum; Crescent Shape
2 Mounting Screws for Dome Cap
Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2 Figure 5.7).
Attach grounding wire from unit to the mounting cap (see
Figure 5.9).
Attach user supplied ground to junction box.
Connect the mating connectors with the flying leads to the
user supplied wiring (see the Section 8 Preparing the
Wiring, page 63 for wiring information).
Installation Manual
AutoDome Easy II IP
Bosch Security Systems, Inc.