Table of Contents
Advertisement
AutoDome Easy II IP
10
Getting Started
Once the installation is complete, the AutoDome Easy II can be
programmed. A typical system includes a keyboard, matrix
switcher, monitor, and appropriate wiring connections. Please
refer to the individual product manuals for complete installation
and setup instructions for each of the system components.
10.1
Powering On
When you turn the AutoDome Easy II power on there is a ten
(10) second pause before the dome starts its homing phase.
During the homing phase the camera pans left and right and
tilts up and down. It also adjusts the lens focus. The entire
homing phase lasts approximately 20 seconds and ends with a
splash screen.
WARNING!
Before powering the dome on, remove the clear protective
plastic sheet on top of the bubble.
Bosch Security Systems, Inc.
Installation Manual
Getting Started | en
F.01U.164.576 | 2.0 | 2010.03
73
Hide quick links:
Advertisement
Table of Contents
