Installing The Camera To The Mounting Plate - Bosch VCD Series Installation Manual

24 en | Installing a Surface Mount
3.
4.
4.1.3

Installing the Camera to the Mounting Plate

To install the camera to the mounting plate for a surface or
suspended ceiling, do the following:
1.
2.
3.
4.
F.01U.265.806 | 1.0 | 2012.03
Secure the mounting plate to the junction box with the
user supplied hardware (see Figure 4.3).
Figure 4.3 Install the Mounting Plate
1 Junction Box Holes
2 Cable Hole (40 mm maximum); Crescent Shape
3 Mounting Plate
4 Junction Box
Skip to Section 4.1.3 Installing the Camera to the Mounting
Plate, page 24, to continue the installation.
Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2 Figure 4.3).
Attach grounding wire from unit to junction box.
Attach user supplied ground to junction box.
Connect the mating connectors with the flying leads to the
user supplied wiring (see Section 8 Preparing the Wiring,
page 51 for wiring information).
Installation Manual
HD Conference Dome
Bosch Security Systems, Inc.