AutoDome Easy II
3.
Reference # Description
1
2
3
4
4.1.3
Installing the Camera to the Mounting Plate
To install the camera to the mounting plate for a surface or
suspended ceiling, do the following:
1.
2.
3.
4.
Bosch Security Systems, Inc.
Secure the mounting plate to the junction box with the
user supplied hardware (see Figure 4.3). Proceed to
Section 4.1.3 Installing the Camera to the Mounting Plate,
page 19.
Figure 4.3 Install the Mounting Plate
Junction Box Holes
Cable Hole (40 mm maximum); Crescent Shape
Mounting Plate
Junction Box
Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2 Figure 4.3).
Attach grounding wire from unit to junction box (see
Figure 4.5).
Attach user supplied ground to junction box.
Connect the mating connectors with the flying leads to the
user supplied wiring (see the AutoDome Easy II User Manual
for wiring information).
User Manual
Installing a Surface Mount | en
F.01U.139.424 | 2.0 | 2009.08
19