Power Connections To Outdoor Cameras - Bosch VEZ-221-ECCE Installation Manual

66 en | Preparing the Wiring
8.2.2

Power Connections to Outdoor Cameras

NOTICE! The AutoDome Easy II IP outdoor camera cannot be
powered via Power over Ethernet. You must supply a 24 VAC
power supply to the camera.
Figure 8.2 Power Cable
Ref. # Wire
1
2
3
WARNING!
The camera unit accepts 24 VAC, 1.2 A power only. Do not
connect 120 V or 230 V to this camera.
To connect the power to outdoor models:
1.
2.
3.
4.
F.01U.164.576 | 2.0 | 2010.03
24 VAC
24 VAC
User supplied Power Supply
Locate the cable assembly with a three (3) pin mating
connector on one end and the red and black flying leads on
the other end.
Connect one lead of the 24 VAC power source to the black
wire.
Connect the other lead of the 24 VAC power source to the
red wire.
Connect the green earth ground cable to a suitable
grounded conduit.
Installation Manual
AutoDome Easy II IP
Color
Red
Black
n/a
Bosch Security Systems, Inc.