Preparing The Wiring; Power - Bosch VEZ-221-ECCE Installation Manual

AutoDome Easy II IP
8

Preparing the Wiring

The wiring requirements for the various AutoDome Easy II
models differ slightly. There are four (4) types of wires: control,
video, power, and alarm, and each model has different wiring
requirements. Each section provides the specifications for the
recommended wire.
CAUTION!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code or
applicable local codes.
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.
8.1

Power

The recommended power cable is a 2-conductor, 14-18 gage
cable, depending on the distance.
Camera, Indoor models
24 VAC to AutoDome Easy II 18 / 10
12 VDC to AutoDome Easy II 10 W
Camera and Heater, Outdoor models only
24 VAC to AutoDome Easy II 18 / 10
24 VAC to Heater
Table 8.1 Max. Wire Distances from Power Supply to AutoDome Easy II
Bosch Security Systems, Inc.
VA / Watts 14 AWG
25 / 25
Installation Manual
Preparing the Wiring | en
16 AWG
(2.5 mm) (1.5 mm)
632 ft 398 ft
(193 m) (121 m)
285 ft 179 ft
(87 m) (55 m)
632 ft 398 ft
(193 m) (121 m)
455 ft 287 ft
(139 m) (67 m)
F.01U.164.576 | 2.0 | 2010.03
63
18 AWG
(1.0 mm)
250 ft
(76 m)
112 ft
(34 m)
250 ft
(76 m)
180 ft
(55 m)