Table of Contents
Advertisement
30
en | Installing a Surface Mount
11. Route the external wires through the conduit and into the
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.
12. Secure the mounting plate to the Surface Mount Adapter
1
2
13. Skip to Section 4.1.4 Installing the Camera to the Mounting
4.1.4
Installing the Camera to the Mounting Plate
To install the camera to the mounting plate for a surface or
suspended ceiling, do the following:
1.
2.
3.
4.
F.01U.275.803 | 6.0 | 2012.11
Surface Mount Adapter.
with the three (3) M4 – .7 x 8 Phillips pan head machine
screws.
Figure 4.8 Install the Mounting Plate
Junction Box Holes
Cable Hole (40 mm maximum); Crescent Shape
Plate, page 30, to continue the installation.
Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2 Figure 4.3).
Attach grounding wire from unit to junction box.
Attach user supplied ground to junction box.
Connect the mating connectors with the flying leads to the
user supplied wiring (see Section 8 Preparing the Wiring,
page 77 for wiring information).
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
