Installing The Camera To The Mounting Plate - Bosch VEZ Series Mounting Manual

AutoDome Easy II
4.1.4

Installing the Camera to the Mounting Plate

To install the camera to the mounting plate for a surface or
suspended ceiling, do the following (certain steps contain
additional information for outdoor installations):
1.
2.
3.
4.
5.
Bosch Security Systems, Inc.
Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2 Figure 4.3).
Attach grounding wire from unit to junction box (see
Figure 4.10).
Attach user supplied ground to junction box.
Connect the mating connectors with the flying leads to the
user supplied wiring (see the AutoDome Easy II User
Manual for wiring information).
Unlock the single safety locking screw on the base of the
unit using the user-supplied Allen wrench.
Figure 4.9 Unlock Safety Locking Screw
Mounting Manual
Installing a Surface Mount | en
F.01U.141.122 | 2.0 | 2010.02
17