Bosch Evolution HES7252U Use And Care Manual page 9

Electric range with magnetic control knob and european convection
Hide thumbs Also See for Evolution HES7252U:
Table of Contents

Advertisement

Available languages

Available languages

Extension Oven Rack (some mod-
els)
1. Grasp rack firmly on both sides and pull rack toward you.
2. When the stop is reached, tilt rack up and pull the rest of the way out.
The Full Extension Rack allows for easier access to cooking foods. The bottom
section extends as far as the standard flat rack. However, the top section extends
beyond the bottom section bringing the food closer to the user. To order a full
extension rack, contact Service or a dealer near you.
Top Rack
Bottom
Rack
Removing and Replacing
Note: The full extension rack must be in the closed position when removing and
replacing. Grasp the entire rack (both sections).
1. Grasp the bottom section and pull straight out.
2. Once the stop is reached, grasp the top section and pull straight out until the
second stop is reached. If the top rack will not extend fully, it is not installed
correctly. Reinstall it so that the pan stop is in the back of the oven.
Disassembly (for cleaning)
The two sections of the rack are designed to come apart for easier cleaning.
1. Place rack on flat surface in the closed position top side up.
2. Rotate one side of top rack towards you until it is past the stop (ball).
3. Pull the rack up and out, rotated side first.
Closed Position
Reassembly
Back of Rack
Stops
Front of Rack
Back of Rack
Front of Rack
Getting Started
Pan Stops
Top Rack
Stop (Ball)
Rack Guide
Top Rack Rest
Figure 3: Full Extension Rack
Stop (Ball)
Figure 4: Disassembly
English 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents