Turn signal and hazard bulb - Replace
1. Remove the four screws (1) retaining the taillight lens
(2) and remove the lens.
2. Push in on the bulb and rotate the bulb clockwise in the
socket to remove the old bulb.
3. Insert the new bulb into the socket and turn the bulb in
a clockwise direction until tightened.
NOTE: Replace the turn signal / hazard bulb with a 21 W
bulb.
NOTICE: The side lights warning lights and brake light
bulbs can not be replaced. If any of these light functions
fail the complete light assembly must be replaced.
7 - MAINTENANCE
7-46
1
NHIL17CT00184AA