Before Using The Tractor - Cab (If Equipped) - New Holland Workmaster 25S Operator's Manual

Before using the tractor - Cab (If equipped)

Must read and understand this operator's manual carefully and always refer to information and
prescriptions outlined in this manual to prevent all potential health and safety risks.
General information for intended use
• This compact tractor with semi-cab is designed and manufactured to carry a load or work with various front/rear
mounted or towed equipment for special agricultural use in snowy or cold conditions. Do not use the product for
other purposes than intended by the manufacturer and outlined in this manual. Never use this tractor for any forestry
application.
• When working with front-end loader, be careful of the center of gravity of the tractor which may be higher than
the Roll Over Protective Structure (ROPS) model. Do not use this tractor beyond its limits of terrain gradient and
stability as outlined in the operator's manual. Using the tractor beyond these limits may cause a rollover accident,
or an overturning accident.
• Protective Structures (Cabin (1)):
○ DO NOT weld, drill holes, or attempt to straighten the
protective structure arbitrarily.
This modification can reduce the structural integrity
of the structure.
○ Any modification may cause an accident and subse-
quently cause death or serious injury, and void the
warranty.
○ Do not step on the fender for the maintenance of
cabin (1) roof.
WARNING
Roll-over hazard!
After an accident, fire, tip over, or roll over, a qualified technician MUST replace the Roll-Over Protec-
tive Structure (ROPS) before returning the machine to the field or job site operation.
Failure to comply could result in death or serious injury.
WARNING
Misuse hazard!
The cab is an integral part of the machine's structure. DO NOT repair, weld, or straighten the cab.
Contact your Dealer and follow their instructions to avoid reducing the structural integrity of the ma-
chine.
Failure to comply could result in death or serious injury.
WARNING
Equipment failure could cause accident or injury!
Always fasten the seat belt securely before you operate the machine. Inspect seat belt parts for wear
and damage. Replace any and all worn or damaged parts of the seat belt prior to operation.
Failure to comply could result in death or serious injury.
WARNING
Improper operation or service of this machine can result in an accident.
Do not modify or repair ROPS or FOPS in any manner.
Failure to comply could result in death or serious injury.
1 - GENERAL INFORMATION
1-4
1
NHIL20CT01086AA
W0134A
W0045B
W0046C
W1556A