Overhead Controls; Switches And Work-Lights - Cab (If Equipped) - New Holland Workmaster 25S Operator's Manual

Overhead controls

Switches and work-lights - Cab (If equipped)

Work lights
WARNING
Driving hazard!
When traveling on public roads, only use the headlights and hazard warning lights. DO NOT use the
work lights. An oncoming vehicle may confuse the rear work lights with the headlights.
Failure to comply could result in death or serious injury.
Front work light switch (1) (See Figure 1)
• This is used to turn on/off the front work lights (1).(See
Figure 2)
• ON - Press the upper side (symbol part) of the switch.
• OFF - Press the lower side of the switch.
• Bulb rated capacity: 12 V 37.5 W
Rear work light switch (2) (if fitted). (See Figure 1)
• This is used to turn on/off the rear work lights (2). (See
Figure 2)
• ON - Press the upper side (symbol part) of the switch.
• OFF - Press the lower side of the switch.
• Bulb rated capacity: 12 V 37.5 W
3 - CONTROLS AND INSTRUMENTS
3-35
W0211A
1
NHIL20CT01090AA
2
NHIL20CT01094AA