Differential Lock Pedal - New Holland Workmaster 25S Operator's Manual

Differential lock pedal

DANGER
Steering is difficult with the differential lock engaged. An accident could result.
During field operation, use the differential lock for traction improvement but release for turning at row
end. Do not drive at high speeds or on roads with the differential lock engaged.
Failure to comply will result in death or serious injury.
The location of the differential lock pedal (1) is below the
operator's seat to the left-hand side.
To apply the differential lock depress the differential lock
pedal. This will cause the rear wheels to rotate at the
same speed and increase rear wheel traction.
If your rear wheels begin slipping in conditions such as
snow or wet surfaces release the travel pedal and depress
the differential lock pedal. Then resume travel operations
with increased rear wheel traction. Once you have made
it through the slippery conditions release the differential
lock pedal.
Turning the tractor will become difficult when the differ-
ential lock in applied. Release the differential lock pedal
before attempting to turn.
NOTE: Depending on the operating conditions applying
the differential lock may cause damage to turf grass.
3 - CONTROLS AND INSTRUMENTS
3-33
D0023A
1
NHIL17CT00183AA