Power Take-Off (Pto) Switch - New Holland Workmaster 25S Operator's Manual

Power Take-Off (PTO) switch

The location of the Power Take-Off (PTO) switch (1) is on
the right-hand side of the dash panel.
NOTE: Place the PTO switch in the "OFF" position to start
the engine.
To engage the PTO, push down on the PTO switch and
turn the switch to the "ON" position (A).
NOTE: Only engage the PTO when the engine is at low
idle speed. This will reduce the shock load on the drive-
line of the attachment.
When the PTO is engaged the PTO indicator light (2) will
be illuminated on the instrument panel.
To disengage the PTO, push down on the PTO switch and
the switch will automatically return to the "OFF" position
(B).
For PTO operating instructions see page 6-14.
3 - CONTROLS AND INSTRUMENTS
3-11
1
NHIL17CT01228AA
2
NHIL17CT00176FA