Thermostat Or Start-Pilot Switch; Hazard Warning Light Switch; Steering Wheel Position Lever; Auxiliary Lamp Control Switch - New Holland TL70 Operator's Manual

THERMOSTART OR START- -PILOT
SWITCH - - Fig. 10
Press switch (1) to position A to operate the auxiliary
starting system.
When the switch is released, it returns automatically
to position B.
See instructions for starting at low temperatures,
page 2--3.

HAZARD WARNING LIGHT SWITCH

- - Fig. 11
Press switch (1) to the red section to turn on the
flashing hazard lights; when pressed, the switch also
flashes.
The panel light flashes at the same time as the direc-
tion indicators.

STEERING WHEEL POSITION LEVER

- - Fig. 12
Pull lever (1, fig. 12) to release the steering wheel
lock. Move the steering wheel up or down to find the
best position for comfortable and safe driving.

AUXILIARY LAMP CONTROL SWITCH

- - Fig. 12
There are three settings for the switch (2):
-- pressed to position A = lights OFF;
-- held in position B = rear lamps on;
-- pressed to position C = front and rear lamps on.
10
11
12
SECTION 1
1- -7