Every 1800 Hours; Fan And Drive - Replace; Every 4000 Hours; Alternator - Replace - New Holland Workmaster 50 Operator's Manual

Every 1800 hours

Fan and drive - Replace

1. Position a linear tensioner belt remover tool in the au-
tomatic tensioner release slot.
2. Rotate the automatic tensioner, in the direction of the
arrow, to remove the tension on the serpentine belt.
a - Serpentine belt
b - Tensioner release slot
3. Install an allen screw into the tensioner hole to block
the tensioner rotation.
4. Before removing the serpentine belt, note the belt po-
sition on the alternator, and idler pulleys.
5. Remove the serpentine belt.

Every 4000 hours

Alternator - Replace

1. Contact your authorized dealer
7 - MAINTENANCE
7-40
1
GNIL14TR00527AA
2
GNIL14TR00527AA