Beacon Lamp Switch - Cab (If Equipped) - New Holland Workmaster 25S Operator's Manual

Beacon lamp switch - Cab (If equipped)

• The beacon lamp switch is used to turn on/off the bea-
con lamp (1), which is connected to the electrical har-
ness at the beacon lamp connectors (2).
• The beacon connectors (2) are installed on the left-hand
and the right-hand rear side under the cabin roof.
• Press the upper side (symbol part) of the switch when
turning on the beacon lamp (1).
• Beacon lamp switch (See figure 1)
• Beacon connector (See figure 2)
3 - CONTROLS AND INSTRUMENTS
3-24
1
NHIL20CT01097AA
2
NHIL20CT01098AB