Do not connect a TAD elsewhere on the same phone line.
When you are using a TAD, the LCD shows Telephone
(MFC-3240C only) or Ext. Tel in Use (FAX-1840C only).
Connections
The external TAD must be connected as shown above.
1
Set your external TAD to one or two rings. (The machine's Ring
Delay setting does not apply.)
2
Record the outgoing message on your external TAD.
3
Set the TAD to answer calls.
4
Set the Receive Mode to External TAD .
(See Choosing the Receive Mode on page 4-1.)
TAD
TAD
APPENDIX A A - 19