Brother FAX-3240C User Manual page 174

Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Pause Allows you to place a 3.5 second delay in the dialling
sequence stored on One-Touch keys and Speed-Dial numbers.
Redial/Pause
Press
pauses.
Photo resolution A resolution setting that uses varying shades of
gray for the best representation of photographs.
Polling The process of a fax machine calling another fax machine
to retrieve waiting fax messages.
Pulse A form of rotary dialling on a telephone line.
Quick Dial List A listing of names and numbers stored in
One-Touch and Speed-Dial memory, in numerical order.
Real Time Transmission When memory is full, you can send faxes
in real time.
Remaining jobs You can check which jobs are waiting in memory
and cancel jobs individually.
Remote Access Code Your own four-digit code (---
you to call and access your machine from a remote location.
Remote Retrieval Access The ability to access your machine
remotely from a touch tone phone.
Resolution The number of vertical and horizontal lines per inch.
See: Standard, Fine, Super Fine and Photo.
Ring Delay The number of rings before the machine answers in
Fax Only and Fax/Tel mode.
Ring Volume Volume setting for the machine's ring.
Scanning (MFC-3240C only) The process of sending an electronic
image of a paper document into your computer.
Search An electronic, alphabetical listing of stored One-Touch,
Speed-Dial and Group numbers.
Speed-Dial A pre-programmed number for easy dialling. You must
Search/Speed Dial
press the
Mono Start
as many times as needed for longer
Colour Start
or
#
, , and the two digit code, and
to start the dialling process.
) that allows
GLOSSARY G - 4