Dialling Options; Access Codes And Credit Card Numbers; Pause - Brother FAX-3240C User Manual

Dialling options

Access codes and credit card numbers

Sometimes you may want to choose from several long distance
carriers when you make a call. Rates may vary depending on the time
and destination. To take advantage of low rates, you can store the
access codes or long-distance carriers and credit card numbers as
One-Touch and Speed-Dial numbers. You can store these long
dialling sequences by dividing them and setting them up as separate
One-Touch and Speed-Dial numbers in any combination. You can
even include manual dialling using the dial pad. (See Storing
One-Touch Dial numbers on page 5-1 and Storing Speed-Dial
numbers on page 5-2.)
For example, perhaps you have stored '555' on One-Touch key
'7000' on One-Touch key
One-Touch key
'555-7000'.
To temporarily change a number, you can substitute part of the
number with manual dialling using the dial pad.
For example, to change the number to 555-7001 you could press
One-Touch key
If you must wait for another dial tone or signal at any point in the
dialling sequence, store a pause there in the number by
Redial/Pause
pressing
delay.

Pause

Redial/Pause
Press
numbers. If you are dialling overseas, you can press
as many times as needed to increase the length of the pause.
5 - 6 QUICK-DIAL NUMBERS AND DIALLING OPTIONS
2
. If you press One-Touch key
2 Mono Start
, and
1
and then press
. Each key press adds a 3.5-second
to insert a 3.5-second pause between
Colour Start
or
7001
using the dialling pad.
1
and
1
,
, you will dial
Redial/Pause