Nortel CallPilot 201i Installation And Configuration Manual page 103

October 2002
2 Do one of the following:
IF you want to stop or start
all of the channels
associated with a
DS30X link
only one or several
channels that are
associated with a
DS30X link
3 Click Courtesy Stop, Stop, or Start, as required.
Result: If you clicked Courtesy Stop or Stop, you are asked to confirm
the Courtesy Stop or Stop. Click OK.
The selected channels change to off-duty or on-duty status, according to
the action you chose.
Note: If the buttons are not available, wait a few seconds for the page to
refresh.
Part 5: 201i Server Maintenance and Diagnostics
Using CallPilot Manager to monitor hardware
THEN
check the check box to the left of the
DS30X link that you want to stop or
start.
Repeat this step for each DS30X
link.
check the check box for each
channel that you want to stop or
start.
103