Table of Contents
Advertisement
Power adapter port
Removing the power adapter port
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Enter the
service
mode.
4. Remove the
base
cover.
5. Remove the speaker.
6. Remove the
M.2 solid-state
7. Remove the
system
fan.
8. Remove the
display
assembly.
9. Remove the
input output
10. Remove the
heatsink
11. Remove the
power button with fingerprint
12. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached.
About this task
The following image indicates the location of the power adapter port and provides a visual representation of the removal
procedure.
Steps
1. Unroute the power adapter port cable from the screw post.
CAUTION:
Carefully unroute the power adapter port cable from the screw post before removing the power
adapter port from the chassis.
2. Remove the power adapter port from the chassis.
56
Removing and installing components
before working inside your
drive.
board.
assembly.
reader.
computer.
Advertisement
Table of Contents
