Table of Contents
Advertisement
Table 6. System setup options—Storage menu (continued)
Storage
Type
Device
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
Table 7. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
EcoPower
Full Screen Logo
Table 8. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
HTTPs Boot Feature
HTTPs Boot
Table 9. System setup options—Power menu
Power
Battery configuration
Advanced Configuration
Displays the M.2 PCIe SSD type information of the system.
Displays the M.2 PCIe SSD device information of the system.
Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Enable to set screen brightness when the system is running on battery power.
Enable to set screen brightness when the system is running on AC power.
Enable or disable EcoPower Feature in your panel. EcoPower can increase
the battery life of your system by reducing the display brightness when
appropriate.
By default, Enable EcoPower option is enabled.
Enable or disable full screen logo.
By default, the option is not enabled.
Enable or disable the internal WLAN device.
By default, the option enabled.
Enable or disable the internal Bluetooth device
By default, the option enabled.
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
Enable or disable the HTTPs Boot feature.
By default, the HTTPs Boot option is disabled.
Enables the system to run on battery during peak power usage hours. Use the
table Custom Charge Start and Custom Charge Stop, to prevent AC power
usage between certain times of each day.
By default, the Adaptive option is enabled.
System setup
65
Advertisement
Table of Contents
