Table of Contents
Advertisement
Steps
1. Align and place the speakers in the slot on the chassis.
2. Route the speaker cables through the routing guide.
3. Connect the speaker cable to the connector.
4. Adhere the adhesive tapes to secure the speakers in place.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the microSD-card.
4. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Enter the
service
mode.
4. Remove the
base
cover.
About this task
The following images indicate the location of the WLAN card and provide a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
23
Advertisement
Table of Contents
