5. Remove the (M2x3) screw that secures the type-c bracket in place.
6. Lift and remove the system board from the system.
7. Lift and remove the type-c bracket from the system.
Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the connectors on your system board.
Figure 2. System-board connectors
1. Power button with fingerprint reader cable
3. Display cable
5. Backlit LED cable
7. Touchpad cable
9. Input output board cable
The following images indicate the location of the system board and provide a visual representation of the installation procedure.
2. Speaker cable
4. Power cable
6. Keyboard cable
8. Coin-cell battery cable
Removing and installing components
53