Table of Contents
Advertisement
Palmrest assembly
Removing the palmrest assembly
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the
M.2 solid-state
7. Remove the
system
fan.
8. Remove the
display
assembly.
9. Remove the
input output
10. Remove the
heatsink
11. Remove the touchpad.
12. Remove the
power button with fingerprint
13. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached.
About this task
The following image indicates the location of the palmrest and provides a visual representation of the removal procedure.
Steps
After performing the preceding steps, you are left with the palmrest assembly.
Next steps
1. Install the
system
board.
NOTE:
The system board can be installed with the heat sink attached.
58
Removing and installing components
before working inside your
drive.
board.
assembly.
reader.
computer.
Advertisement
Table of Contents
